3D · Queen Print
Bambu Lab P2S Combo
Enclosed, 4-spool AMS included
- 4 colours
- 256³ mm
40 000 ₴Queen Print price
Ask Queen Print Partner · Queen Print
Bambu Lab and Snapmaker 3D printers in Kyiv — from our partner Queen Print
Queen Print is our sister 3D printing store: printers, filament and turnkey setup. You buy the printer there, and we help with power so a blackout does not ruin a 12-hour print.
At Queen Print
Printers & AMS
Prices and stock are on the Queen Print website. The button opens the product page there.
3D · Queen Print
Bambu Lab X2D Combo
Enclosed, AMS included
- AMS included
- EU version
48 000 ₴Queen Print price
Buy at Queen Print 3D · Queen Print
Snapmaker U1
Four toolheads, up to 4 colours
- 4 toolheads
- 4 colours
46 000 ₴Queen Print price
Buy at Queen Print 3D · Queen Print
Bambu Lab AMS 2 Pro
Feeds 4 spools and dries them
- 4 spools
- Bambu compatible
14 000 ₴Queen Print price
Buy at Queen Print Power for printing
Why a printer needs a power station or UPS
A long print runs 6–20 hours non-stop. If power drops even for a second, the printer stops, the part has to be printed again and the filament is wasted.
While printing, a printer draws on average 110–350 W. Bed heating at the start takes the most, then consumption drops. An enclosed printer running ABS or ASA with a heated chamber uses the most.
A power station with UPS mode switches to battery in milliseconds and the print keeps going. A 3–5 kWh LiFePO4 station runs the printer, router and lights through an evening blackout.
Calculator with the “3D printer” preset110 WOpen-frame printer, PLA
180 WEnclosed printer, PLA/PETG
350 WEnclosed, ABS/ASA, heated bed
| Station | Capacity | Printing at 180 W |
|---|---|---|
| Станція 3000 Вт·год з гібридним інвертором 4200 Вт | 3,000 Wh | ≈ 14 h 15 min |
| Станція Universal 3200 Вт·год з гібридним інвертором | 3,200 Wh | ≈ 15 h 12 min |
| Станція Delta 5000 Вт·год з гібридним інвертором | 5,000 Wh | ≈ 23 h 45 min |